Scroll down to see more tree spades
Stevens Supertough Heavy
This above is the ulitimate designed
and built tree spade with no compromise.
It is built to withstand extreme down pressure
of large loaders. Look closely at this spade as
it will be a investment and not a purchase.
Sizes 34 - 38 - 42 - 46 - 48 - 54 - 62 - 66 - 68 -72 - 75 - 80
Scroll down for more information on spades
made lighter for use on lighter lift tractors
The above is our Stevens Super-Compact Model.
It is made lighter than either our
Supertough Heavy and our Supertough Light.
Notice that there are not the 7 layers of steel in
hinge assembly. However we have never had a
hinge like this wear out as it has hardened ball
bearing race sleeves in all levels. It is more
economical as we use 1/4" blades, lighter blade
towers which makes it more affordable for
budget conscious customers.
Kindly examine all the following closeup pictures of how a
Stevens Supertough Light tree spade is designed and built with you in mind.
This is a Supertough Light made a little bit lighter
for use on smaller tractors
This Supertough Light spade has 6 layers of steel in hinge assembly
and all layers have hardened ball bearing races with greaseways.
This is toughest time proven hinge assembly
made on any tree spade in our industry.
Scroll down for more information
ree
Frame hinge on Supertough Model made with 7 layers of steel
FFrame laminated with 1/2" thick T1 steel.
Gate cylinder ears part of frame and will not break off.
This frame is toughest frame made on any tree spade period.
Blade towers surrounded by T-1 steel are impossible
to break off under extreme hard digging.
Close up view of massive hinge assembly.
Look closely to see how strong this frame is.
Close up view of guts of hinge assembly
showing how sleeve with hardened ball bearing
races is designed and build into body of frame.
We have never had a hinge wear out.
Other Manufacturers are always improving
their hinge and they say so.
Our has stayed the same for many, many years
because it is the best.
is
BBlade cylinder connections and caps made from T1
steel and welded on top and bottom. Guaranteed to not
break off or stretch out holes in hard digging.
Corner mitres welded in all directions.
It is impossible to break this assembly as it is welded
in all directions, top, sides & bottoms.
We challenge you to find a tougher frame
on any tree spade made anywhere.
Contact Steve Dankewich, and he will help you in any
way he can with 35 years of experience in designing and
building honest tree spades with you in mind.
THE FOLLOWING ARE DESIGNATED SUPERLITE SERIES
THEY ARE AVAILABLE FROM 24" TO 75"
TRUNCATED AND CONE MODELS AVAILABLE
THEY ARE MADE LIGHTER BUT ARE STILL SUPER STRONG.
Blades made from T-1 steel 3/8" thick. AR 400 optional.
T-1 Steel is actually stronger but AR400 is more abrasion resistant.
Blade slide comes with large area nylotron wear pads
which are replaceable externally without taking blades slides off.
wh
This is a Superlite 54 frame made from 3x3 square tubing.
We can custom design and build for you a tree spade
heavier if you have a heavy lift loader..
Frame can be upgrade to 4 x 4 x 3/8" at nominal fee.
g
Corner mitres double reinforced
5 layers of steel supporting hinge with hardened sleeves in all levels.
Gate cylinder ears part of corner mitre wont break off. Frame is 3x3xz 3/8"
Hin
Blade slides made from 8" square tubing 3/8" thick.
Blade towers made from 6" square towers 3/8" thick.
Scroll down for more tree spade information
P
Stevens 75 Hexagon Towers Loader Mount
Stevens 75 Hexagon Blade Towers Truncated at 25 degrees.
Notice extremely heavy duty hook-up to Cat Loader.
This spade will not break off as it is hooked to adapter and hooked to digging module.
Scroll down for more information on our tree spdes
stevens superspade series tree spades
34 - 38 - 42 - 46
Designed and built to enable you to use as large a
spade as possible on a given lift capacity loader.
Look closely as this machine has not weak spots
