NEW MODELS COME WITH OPTIONAL LOW PROFILE IN BLADES UP
POSITION BY USE OF PIGGY BACK CYLINDERS. ENQUIRE FOR PRICING
WORLDS TOUGHEST CURVED BLADED TREE SPADES
Our curved bladed tree spades are designed and built with absolutely no weak spots. Every area of stress has mechanical fixes so that you will not have any trouble with frames, hinges, blades, cylinder hookups, lift arms.
DEMO 90 INCH TRAILER TREE SPADE AVAILABLE FOR $175,000.00 CANADIAN FUNDS
DEMO DUG ONLY 50 TREES
AVAILABLE FOR IMMEDIATE DELIVERY
GREAT FOR MOVING LARGE TREES WITH MINIMAL TYING REQUIRED
30% LESS FOR US DOLLARS
THIS TREE SPADE CAN BE REMOVED FROM TRAILER AND MOUNTED ON A FRONT-END LOADER BY SIMPLY TILTING IT OVER ON GROUND, DISCONNECTING TILT PIN, HOSES AND CONNECTING TO A FRONT END LOADER FOR ON SITE TREE MOVING, WIRE BASKETTING PROCEDURES. MAST REMAINS ON TREE SPADE AND SPADE IS CONNECTED WITH QUICK ATTACH ADAPTERS - TRAILER COMES WITH REAR STABILIZERS
Frame has T1 steel laminated to top and bottom of
6 inch square frame with double overlap hinge.
Massive tilt assembly
Blades made from AR400 in virgin state not heat treated
stevens curved bladed tree spades
CUSTOM MADE TO ORDER
Truck - Trailer - Loader Mount
72 - 80 - 90 - 100 T
These tree spades use simple time proven standard single stage cylinders just like on excavators.
Two cylinders per blade make our spades the most powerful systems made. Competition uses telescopic and similar to telescopic cylinders and they are very prone to blow up and they will enventually cost you a lot of money We have tried double acting telescopic cylinders previously and in every case every one blew up with very expensive repairs plus downtime. In most cases the cylinder had to be replaced with a new one as damaged one was not repairable.We also prefer to use standard manual hydraulic controls as you can feel when the blade meet a rock and you can safely withdraw your blade with no damage. Frame and hinges assemblies extremely heavy duty Waranteed 3 years Lift arm hooked to frame and adapter and Guaranteed to not break off period
Blades made from option of T-1 steel, AR400 or Hardox
THERE ARE NO FINAL BUTT WELDS ON OUR FRAMES OR BLADE TOWER
TO FRAME ATTACHMENT.
IT IS IMPOSSIBLE TO BREAK OFF A BLADE TOWER ON A
STEVENS TREE SPADE AS THE TOWERS ARE WELDED TO TOP PLATE,
BODY OF FRAME AND BOTTOM PLATE VERTICALLY AND HORIZONTALLY
MAKING THIS SYSTEM THE STRONGEST IN THE INDUSTRY.
THE TOWERS ARE FULLY CROSS-SECTIONAL AND WILL NEVER FAIL.
Blades come to Massive tilt pin assembly impossible to break off.
Tree spade can be tilted if spade accidentally
falls in hole with no damage to tilt assembly ffening ribs for blade strength
Note cross rib tying all blade parts together
Twin blade thrust cylinders for low maintainence. Wear pads replaced externally
Massive tilt support assembly Llift arm hooked to frame
Stevens TS 90 showing frame, blade towers, gussetsD